Matters needing attention when using melt flow rate meter

The melt flow rate meter is an instrument for measuring the flow properties of thermoplastic polymers at high temperatures according to the test method of GB3682-2000. It is used for polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon fluoroplastics and other high-polymer polymers. Determination of the melt flow rate of a substance at high temperatures. It is suitable for production and research in factories, enterprises and scientific research units.
Matters needing attention when using melt flow rate meter
1. The single power socket must have a grounding hole and be reliably grounded.
2. If an abnormal display appears on the LCD, press the "reset" button to reset the test temperature and start work.
3. During normal operation, if the furnace temperature is greater than 450°C, the software will protect it, interrupt heating, and issue an alarm.
4. If an abnormal phenomenon occurs, such as the temperature cannot be controlled or displayed, etc., it should be shut down and repaired.

5. When cleaning the piston rod, do not scrape with hard objects.

Melt flow rate meter