Melt index meter

HRZ-400C melt flow rate tester

The instrument is a large color LCD display with a full Chinese operation interface, the first in China. Automatic timing, automatic cutting, automatic printing and other functions.

One product name: Melt Flow Rate Tester

Second product model: HRZ-400C

Three main uses and functions:
The melt flow rate tester is designed and manufactured according to the requirements of GB / T3682-2000. The main parameters of the melt flow rate tester meet the requirements of ISO1133-97 and ASTM1238 standards. It can be used for polyethylene, polypropene, polystyrene, ABS , Polyamide, fiber resin, acrylate, polyoxymethylene, fluoroplastic, polycarbonate and other plastic materials to determine the melt mass flow rate (MFR) or melt volume flow rate (MVR); melt flow rate The measuring instrument adopts imported dual display intelligent temperature control instrument with stable temperature control accuracy. The instrument is programmed by the microprocessor according to standard test procedures, Chinese display, automatic timing, automatic cutting, automatic printing and other functions. (It can be equipped with English operation method according to the special requirements of users).

Four main technical parameters:
Temperature control range: room temperature --- 400 ℃
Temperature control accuracy: ± 0.2 ℃
Display resolution: 0.1 ℃
Maximum power consumption: ≤500 W
Temperature recovery time: 4 min
Piston position detection: (MVR)
Distance between upper and lower ring: 30 mm
Displacement control accuracy: ± 0.1 mm
Test range: 0.03-450g / 10min

Standard parts parameters:
Barrel parameters: inner hole Φ9.55 ± 0.025mm
Piston parameters: Piston head Φ = 9.475 ± 0.015mm;
Piston head length H = 6.35 ± 0.1mm
Mouth film parameters: extrusion hole Φ = 2.095 ± 0.005mm
Die configuration: Φ2.095 ± 0.005 / Φ1.18 ± 0.01mm

Weight parameters:
Weight accuracy: ± 0.5%
Basic configuration: A 0.325 KG (including pressure rod)
B 0.875 KG
C 0.960 KG
D 1.200 KG
E 1.640 KG
Note: Weights can be added according to user requirements